Audiolab MAGNA 118A Manual De Usuario página 6

4. CONNECTION PLATE
Make your initial connections with all the equip-
ment powered off, and ensure that all the main
volume controls are turned completely down.
For active Full-range Speaker Cabinet
1. Connect one side of the signal cable at your
mixer into Output Left/Right (with Stereo-Jack
or XLR) and the other side of the cable into
the Line Input (COMBO) of your active speaker
cabinet (with Stereo-Jack or XLR).
Tripod
mount
P. 6
AUDIOLAB Magna 118A -
English version
signal cable
Left
Main Mix
Output
Mixer
2. Connect the power cords to main.
3. Turn on yout mixer first, then the active
speaker cabinets.
4. Turn uo the volume controls of the active
speaker cabinets.
5. Use PFL function to get the proper input
level fot the mixer, and adjust the Main Mix
Level control to manipulate the output level.
6. After using, turn off your active speaker cabi-
nets first, the the mixer.
signal cable
Right
Main Mix
Output
Tripod
mount