Index Function - Dictaphone Professional Serie Manual De Usuario

4. Slide the Mode Selector switch
Record position and make sure that the red
LED indicator ¸ on the top panel lights. (If the
indicator does not light, replace the batteries or
use the optional AC adaptor.)
5. Hold the unit so the microphone
approximately 8cm (3 inches) from your
mouth and speak in a normal voice.
6. When using the conference mode, set the Dict
Conf switch at Conf position. Then, set the
Mode Selector switch
and place the unit at the center of the table or
desk.
7. When dictation or conference is completed,
slide the Mode Selector switch
position.
Note: Recording level is adjusted automatically.

Index Function

During recording, press the Index button » to
record an index mark to separate the tape contents
into segments as desired. The red LED indicator ¸
blinks for two seconds.
The index function works only with the tape speed
of 2.4cm/s.
to the
is
to Record position
to the Stop
5