Audiolab EDGE 25 Manual Del Usuario página 8

Connect Manner
1. Align two units to make the latch hole in the
same line. Insert the latch and lock the screw
tightly.
2. Adjust the angles of the unit (nine angles: 0°
-1.5° -3.0° -4.5° -6.0° -7.5° -9.0° -10.5° -12° for
EGDE 25 can be adjusted), insert the rear con-
Adjustable sound dispersion (for example four pcs)
A system in configured by vertically stacking four
speaker modules with a total driver complement
of four woofers and 12 tweeters (four tweeters
of EGDE 25) positioned along the baffle surface,
this configuration allows the variable directivity
control and low-frequency dispersion control com-
parable to using a large constant-directivity horn
speaker. A choice nine angles for EGDE 25 can
be employed as needed. For instance, a specific
P. 8
AUDIOLAB EDGE 25 -
English version
necting pin into the related slot and put the
latch into the hole.
3. You can insert each three different holes
when connecting the rear bracket. You can
obtain different sound by different angles.
directivity angle, or each module can have its
directivity independently set for a specific cover-
age requirement. When two or multiple modules
are connected to configure an arc, they effectively
function as an immense single speaker controlling
directivity for considerably lower frequencies. As
a result, public address functions demonstrate
optimal intelligibility even in environments with
long reverb times.