Operating Modes - domoova DFW50 Manual Del Usuario

EN
Operating the appliance
Press the power button on the top of the main body to turn the
DFW50 on (Figure 2). The LED lights turn on (Figure 3) when the
appliance is ready to use.
Press the ON/OFF button on the control handle to start the appliance.
NOTES:
• The appliance must not be used for more than 20 consecutive minutes as this
may damage the motor.
• The appliance is free-standing. When you start the appliance, hold it firmly by
its control handle to avoid any damage.
• When the appliance is not active for around 10 minutes, it automatically goes
into standby. The LED lights are off. Press the ON/OFF button twice to come out
of standby mode.

Operating modes

Dry mopping or polishing
Attach the blue cleaning pads (for dry mopping or polishing) to
the appliance's rotating disks using the Velcros. Dry mopping is
recommended for removing dust from floors or for polishing them.
The cleaning pads must be completely dry and the water tanks empty
when you use this cleaning mode. These cleaning pads are suitable
for polishing delicate floor surfaces, such as waxed concrete. You
need to use a floor polish for this cleaning mode.
10