Parts Description; Important Safeguards - Continental CE-IR941 Manual De Usuario

PARTS DESCRIPTION

1. Handle
2. Spray button and burst button
3. Water inlet
4. Thermal isolation plate
5. Cord Guard
6. Water tank
7. Temperature adjustable
8． Steam adjusting knob
9． Idicator light
Make yourself familiar with the your new dry steam iron according to the description. Pay attention to the sale guards; they
shall assist you to avoid accidents and damages.

IMPORTANT SAFEGUARDS

- Connect steam iron whit a correctly installed power point (120V). Make sure that the voltage of your steam iron is in
accordance with the voltage of your power supply.
- Do not allow children use it.
- Unplug the appliance even during short-term absence.
- The iron must not left unattended while it is connected to the supply.
- The plug must be removed from the socket-outlet before the water reservoir is filled with water.
- If the supply cord is damaged, it must be replaced by the manufacturer of its service agent or a similarly qualified in ordeto
avoid hazard.
- Do not use the dry steam iron if the appliance itself cable or the plug are damaged.
- Do not immerse the dry steam iron into water.
- Keep the cable away from hot steam plate.
- Let the steam iron completely cool down storing.
- Always keep the instruction manual. In case the steam iron is given away to a third person instruction manual must be
handed over, too.
- Note: Before first use test with an old tissue whether the steam plate and water tank are clean. Some parts have been
slightly greased, thus smoke can raise during first use. This should stop after some moments.
- the iron must be used and rested on a stable surface;
- when placing the iron on its stand, ensure that the surface on which the stand is placed is stable;
The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking
2
8
3
1
7
5
6
9
4