Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
⑧ x 34
26. Now, go back and securely tighten all the cam locks and screws. Make sure that all the parts are tight
and there are no gaps between the parts. This will help keep the unit square.
27. Ask for assistance to lay down the assembled unit at its front edges.
28. Pick up the Upper Back Panel (V) and align the pre-drilled holes against the long edge with the pilot
holes on the back of Top Panel (A). And attach it in place with provided Washer Head Screws (8).
29. Unfold and pick up the Lower Back Panel (W) and attach the Back Panel in place using the provided
Washer Head Screws (8).
NOTE: We recommend attaching back panel with washer head screws at the corners first.
Assembly Instructions
26
Publicidad
Tabla de contenido
