Vava VA-EE004 Guia Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Before Operating the Air Purif ier
1. Carefully remove your air purif ier from the box and plastic bag.
2. Put it on a f irm, level, and flat surface.
*For proper air flow, locate the unit at least 1 foot / 30 cm from any wall or furniture.
*Make sure none of the grilles are blocked.
3. Before using, discard the package of the f ilter in the unit.
4. Plug the power cord into a right voltage AC outlet.
IMPORTANT:
When moving the air purif ier, always lift the unit by carrying the handle
located on back.
Installing & Removing the Filter
*The f ilter will last approximately 6 months.
1. Open the front cover from the top.
2. Remove the f ilter by pulling the two tabs.
3. Discard the package of the new f ilter.
4. Insert the new f ilter into the unit. Consult the tabs on the f ilter for correct installation direction.
5. Reattach the front cover of the unit and securely latch into place.
6. Press and hold the RESET Button for 3-5 seconds to reset the Filter Change Indicator.
How Your Air Purif ier Works
3-Stage Cleaning System
STAGE 1
Pre-Filter
Room Air
This model air purif ier incorporates a 3-stage cleaning system to clean the air that passes
through the f ilter.
Stage 1: Dust and pollen reducing by the Pre-f ilter
Stage 2: Odor reducing by activated Carbon Filter
Stage 3: True HEPA Filter that captures particles as small as 0.3 microns or larger
ON/OFF
UV-C LAMP
Operating the Air Purif ier
1. POWER BUTTON
Press to turn on / off the unit.
2. UVC BUTTON
Press to turn on / off the UV lamp.
3. SPEED BUTTON
Press to adjust the fan speed when the unit is in operation (Low I/ Medium II/ High III).
STAGE 2
Carbon Filter
STAGE 3
True HEPA Filter(s)
Cleaner Air
I II III
SLEEP RESET
2H 4H 8H
RESET
03/04

Publicidad

Tabla de contenido
loading

Tabla de contenido