Husqvarna 28504960044 Manual Del Usuario página 6

6
- Position chain guard trim
Ensure that the cables can neither become kinked or pinched!
- Secure the cable with cable tie
- Mount screws and tighten to 2.1 Nm.
- Position the entire chain guard.
- Mount original nut , but do not tighten yet.
- Mount original screw with washer
tighten yet.
- Mount original screw with washer
5 Nm.
- Tighten screw to 7 Nm (Loctite 243).
- Tighten nut to 5 Nm.
on chain guard .
.
(included), but do not
(included) and tighten to