Setting The Clock - memorex MX4139 Guia Del Usuario

SETTING THE CLOCK

1
With the power off, press the
PROG./MEMO./Clock Set button;
"12H" or "24H" will blink.
4
1
Press the Tune/Skip/Time Down (-)
1 or Up (+) 2 button to set the
current hour. (If you selected 12H
mode, be sure to observe the AM or
PM indicators to make sure you have
set the hour correctly.) Press the
PROG./MEMO./Clock Set button 3
again; the minute digits will blink.
NOTE: The time will appear in the display when the unit is turned off or when you press the FUNCTION
button and enter AUX mode.
OPERATING INSTRUCTIONS
2
Press the Tune/Skip/Time Down (-)
1 or Up (+) 2 button to set the unit
to the 24 hour (24H) mode (also
known as military time) or 12 hour
(12H) mode.
5
2
Press the Tune/Skip/Time Down
(-) 1 or Up (+) 2 button to set the
current minute. Press the PROG./
MEMO./Clock Set button
the time will be set.
3
1
2
Press the PROG./MEMO./Clock
Set button and the hours will
blink.
1
2
and
8