Using The Dryer - Ecodryer Blade Manual De Instrucciones

Using the Dryer

Self-check indicator
When a malfunction or error occurs, the self-check indicator on the right side will either light up
or flash.
Turn off the power switch, wait about 40 seconds until all the indicators go off, then turn on the
power switch.
If the indicator still lights up or flashes, turn off the power, disconnect the unit from the socket, and
contact your dealer immediately.
when using the unit
Turn on the power switch.
The power indicator lights up.
The lamp lights up.
The cover of power supply is closed.
Stretch out both hands and insert them all the way in.
The unit starts to run automatically.
Pull them out slowly, letting the air blow the water off.
Pull them out completely.
Stay 5 seconds.
Using the Dryer