About This Guide; What Is Included; Dmx Linking - Chauvet Professional RDMX Splitter 8 Guía De Referencia Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN

About This Guide

The RDMX Splitter 8 Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu
options, and DMX values. Download the User Manual from
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
Safety Notes
DO NOT open this product. It contains no user-serviceable parts.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
CAUTION: This product's housing may be hot when operating. Mount this product in a location with adequate
ventilation, at least 20 in (50 cm) from adjacent surfaces.
DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
USE a safety cable when mounting this product overhead.
DO NOT operate this product if the housing or cables appear damaged.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
ONLY use the hanging/mounting bracket to carry this product.
In the event of a serious operating problem, stop using immediately.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, France, Germany, or Benelux, contact your distributor to request
support or return a product. From inside the U.S., UK, Ireland, Mexico, France, Germany, or Benelux, use the information
in
Contact Us
at the end of this QRG.

What is Included

RDMX Splitter 8
Neutrik® powerCON® power cord
Warranty Card
Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
The maximum output current from the RDMX Splitter 8 is 15A. See the User Manual or the specification sticker on the
product for more details.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.

DMX Linking

The RDMX Splitter 8 will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
1
QUICK REFERENCE GUIDE
www.chauvetprofessional.com
Wire (U.S.)
Black
White
Green/Yellow
for more details.
Wire (Europe)
Brown
Blue
Green/Yellow
RDMX Splitter 8 QRG Rev. 1
Screw Color
Yellow/Brass
Silver
Green

Publicidad

Tabla de contenido
loading

Tabla de contenido