General Safety Rules; Safety Instructions - Casals LM1000EA Instrucciones Originales

2. GENERAL SAFETY RULES

The purpose of the safety rules is to attract your
attention to possible dangers. The safety symbols
and the explanations with them, require your care-
ful attention and understanding. The safety warn-
ings do not by themselves eliminate any danger.
The instruction or warnings they give are not sub-
stitutes for proper accident prevention measures.
Parts Discription:
1. Main body and motor assembly
2. Lower Handle
3. Upper Handle
4. Securing knob and bolt
5. Cable clip
6. Wheel
7. Switch Box
8. On/Off Switch
9. Grass collection box
IMPORTANT:
The range of CASALS Outdoor Power tools is safe
and reliable, but incorrect use of these products
may cause personal injury and or damage to your
machine. Please read this manual thoroughly
before attempting to operate or assemble as this
product is required to operate strictly in accord-
ance with this manual.

Safety Instructions

WARNING
Read and understand all instructions. Save these
instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or seri-
ous injury. The term 'power tool' in all of the warn-
ings below refers to your mains-operated (corded)
power tool.
Intended Use and Reasonably Foreseeable
Misuse:
The Lawn mower is intended to be used only for
mowing domestic lawns. The Lawn mower has
been designed for use only in private gardens and
is not suitable for use in public grounds, parks,
sports fields or for agricultural or forestry purposes.
Only mow the lawn when the grass is relatively dry.
Any other use of the lawn mower is considered
inappropriate use. The manufacturer shall not
be liable for any damage or injury resulting from
misuse.
Only the manufacturer's approved replacement
parts and blades are to be used on the machine.
Structural modifications or use of components not
approved by the manufacturer will void the war-
ranty and absolve the manufacturer of any liability.
Even with the intended use of the lawn mower
there is always a residual risk, which cannot be
eliminated.
According to the type and construction of the lawn
mower the following potential hazards might apply:
- Ejection of stones etc. from the cutting area (Cut-
ting / injection hazards)
- Injury from the exposed blade during mainte-
nance (Cutting hazard)
- Electric shock on contact with non-insulated
electric components,
- Loss of hearing If suitable ear protection is not
worn
Warning: The actual level of vibration while using
the lawn mower may differ from the level specified
in this manual by the manufacturer. The following
factors may affect actual level of vibration:
- correct use of the lawn mower
- proper maintenance of the lawn mower
- selected height of cut
- sharpness and balance of blade
Make a work plan so that your exposure to vibra-
tion can be limited.
If you experience an unpleasant sensation or skin
discoloration while using the lawn mower, immedi-
ately stop working. Take sufficient work breaks to
prevent hand-arm vibration syndrome.
Maintain the machine in accordance with the
instructions in the manual.
Do not use the lawn mower at temperatures
below10 °C.
1. Training
• Read the instructions carefully. Be familiar with
the controls and the correct use of the machine.
• Never allow children or people unfamiliar with
these instructions to use the machine. Local regu-
lations can restrict the age of the operator.
• Never operate the machine while people, espe-
cially children, or pets are nearby.
• Keep in mind that the operator or user is respon-
sible for accidents or hazards occurring to other
people or their property.
2. Preparation
• While operating the machine always wear sub-
stantial footwear and long trousers. Do not operate
the machine when barefoot or wearing open
sandals. Avoid wearing clothing that is loose fitting
or that has hanging cords or ties.
• Thoroughly inspect the area where the machine
is to be used and remove all objects which can be
thrown by the machine.
• Before using, always visually inspect the machine
to see that the blade, blade bolt and the blade as-
sembly are not worn or damaged. Replace worn or
damaged components in sets to preserve balance.
Replace damaged or unreadable labels.
• Before use check the supply and extension cord