Turning On/Off - VENOM Power Pack & Stand VS4797 Guia Del Usuario

ENGLISH
Power Pack & Stand
For use with Nintendo Switch.
Model number: VS4797
User Guide
Thank you for purchasing the Venom Power Pack &
Stand. Please read this user guide thoroughly before
using the product and keep the guide safe for further
reference.
Charging Your Power Pack & Stand
Connect the USB Type C cable to the power pack,
then connect the other end to a USB power source.
When the Power Pack & Stand is charging, the blue
LED indicators will flash. Once fully charged, all four
LED indictors will remain solid.
Inserting Your console
Slide the catches on the rear of the power pack to the
'unlock' position (see fig 1). Slide the top of the power
pack upwards.
Insert the bottom of the Nintendo Switch first,
ensuring that the USB Type C connector slots into the
console (see fig 2).
Push the top of the power pack down and slide the
catches on the rear into the 'lock' position (see fig 3).

Turning On/Off

To turn on the Power Pack & Stand, press the power
button on the left-hand side once. The blue LED
indicators display the amount of charge remaining.
To turn off the power pack, press the power button on
the left-hand side twice. The LED indicators will also
turn off.
Fig. 1
Fig. 2
Fig. 3