Configuration - Kicker ZXSUM8 Manual Del Propietário

CONFIGURATION

Internal Mode Switches: Change the mode of channels 2–4 between summing plus line-output conversion
(LOC) and line-output-conversion-only by fl ipping the internal switches, accessible by removing the cover of the
ZXSUM8.
Use LOC-ONLY mode to convert a channel's input from high-level (speaker-level) to a low-level signal suitable for
connection to an amplifi er.
Use SUM+LOC mode to mix the channel in question with Channel 1. The mixed signal appears on the Channel
1 output at low-level suitable for connection to an amplifi er. The channel's original signal is also converted to low-
level then passed through to its corresponding output.
CH4
ground
isolation
jumper
200 Ω
ground
4
2010 ZXSUM8 RevC.indd 4 2010 ZXSUM8 RevC.indd 4
inputs
CH3 CH2
RCA outputs
If you experience noise after installing the ZXSUM8, try
adjusting the ground isolation jumper to the position that
provides the least amount of noise.
isolated
ZXSUM8
LOC-ONLY mode
SUM+LOC mode
mode
switches
ZXSUM8
with cover removed
12/28/2009 11:19:01 AM 12/28/2009 11:19:01 AM