Lenmar iBatteryCase Manual Del Propietário

Model: BC4
iBatteryCase - iPhone® 4 Battery Case
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT
OPERATING INSTRUCTIONS FOR YOUR UNIT.
Owner's manual
Thank you for purchasing the iPhone 4, iBatteryCase. The iBatteryCase case o ers the convenience of an
external battery built into the full protection of a hard case. You can use it as a case all the time and enjoy
the convenience of extra battery power when you need it.
Included in the package you have purchased:
iBatteryCase, USB charging / Sync cable and User manual
Charging your iBatteryCase
Note: Prior to initial use, fully charge your iBatteryCase before connecting to your iPhone.
You can charge the iBatteryCase case with the Micro USB to USB cable included with the case. Just plug the Micro
USB into the case, and the other ends USB into a computer USB port or into a wall plug style adapter that has a
USB output.
The LED status indicators show the current charging status of the case. The LED's will blink and become steady as
the case charges, from right to left the 1st LED , 2nd LED, 3rd LED and nally the 4th LED. Once the 4th LED has
become steady, the charging process has nished.
With the iBatteryCase connected to the iPhone charging is as follows.
First the iPhone will receive about 2.5 hrs of charge and then the iBatteryCase begins to charge.
On/Off Button
With the built in "ON / OFF" button you have the option of
using the iBatteryCase when you need it. When you need
an extra charge in your phone, just push the button and
hold for two seconds to turn "ON" and the iPhone case will
proceed to charge your main battery. When you are ready
to turn it "OFF, " just hold the button again for two seconds
and the iBatteryCase will shut "OFF. "
Installing your iPhone into the iBatteryCase
Slide your iPhone facing you into the iBatteryCase from
the top making sure the 30 pin connector and the
bottom of the iPhone line up and connect correctly.
Then take the top cover aligning it into the channels of
the lower case, slide down until it sets rmly into the
bottom half of the case. Once connected you can push
the "ON / OFF" button located on the back of the case
once to turn it "ON. " You should now see the charge
indicator icon appear on your iPhone.
Battery Consumption
Your iBatteryCase will always drain rst until its power is 5%, and then your iPhone switches to its main battery.
USB
Status
Indicator
On/O Button
30 pin connector
Checking remaining capacity of the case
The integrated LED status indicator tells you exactly how much battery power is
left in your case. Simply press the "ON / OFF" button. The 1st LED will indicate
20% or less charge remaining, the 2nd LED will indicate between 40 – 60%
charge remaining and the 3rd LED will indicate 60 -80% charge remaining, and
the 4th LED will indicate 80-100% charge remaining.
SYNC
Enjoy the convenience of syncing your iPhone without ever removing the case.
Using the supplied cable, you can charge and sync your iPhone to iTunes
without ever removing it. Just plug the Micro USB cable into the case and the
other end into your computer's USB slot.
Specifications
Cell type:
Lithium-Polymer Battery
Input: DC 5V500mA
Output: DC 5V500mA
Capacity:
1700mAh
Dimensions: L128 x W62 x T17.6mm
Weight: 65g
Compatibility: iPhone 4
Limited 1 Year Warranty
Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original date of purchase. Warranties are not
transferable. The warranty excludes damage resulting from accident, misuse, modi cation, delay or loss of use, damage to equipment or by normal wear
and tear.
ALL WARRANTY REQUESTS MUST BE SUBMITTED AT: www.lenmar.com/warranty
INCLUDE A COPY OF ORIGINAL PROOF OF PURCHASE WITH RETURNED BATTERY OR THE CLAIM WILL BE DENIED.
LED
Copy of Proof of Purchase from an authorized Lenmar Dealer must include the following:
- The company where the product was purchased.
- The date of purchase.
- The model number of the product purchased.
- Send back the product freight prepaid (we recommend insuring the package as Lenmar will not be responsible for shipments lost or damaged in transit).
Include $10.00 payable to Lenmar Battery Solutions for processing fee for ship to address in the Continental United States.
Include $15.00 for ship to address in Hawaii, Alaska or Canada.
Use preprinted Lenmar shipping label or clearly print your RA Number on the outside of the shipping carton.
Proposition 65 Notice (California)
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice
Foundation against multiple electronics and appliance manufacturers
• WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to cause birth defects or
For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.lenmar.com or
call 800/424-2703 from 9AM – 5PM PST.
310-541-33-0903 r1 y1
Standby: Up to 210 hours*
Up to 5 hours and on the 3G network.
Talk Time:
Up to 10 hours on the 2G network.
Up to 4.5 hours and on the 3G network.
Internet Use:
Up to 7 hours on Wi-Fi.
Audio Play: Up to 28 hours*
Video Play: Up to 7 hours*
*All above times can vary due to device settings, location, and signal strength.
Send to:
Lenmar Battery Solutions
Attn: Return Department
4035 Via Pescador
Camarillo, CA 93012-5050
other reproductive harm. Wash hands after handling.
Lithium-Polymer battery must be
recycled or disposed of properly.
LED Status Indicator
On/Off Button
USB