Technical Data - Dension Audio Systems ice-Link FM Manual Del Usuario

ice>Link FM
5) Fix the ice>Link FM
fixing choose a part or surface that does not transmit
direct vibration of the car body to the device (e.g. a
cable bundle).
6) The ice>Link FM
wrapping, that will reduce vibration and enhance
sound quality.
WARNING!
In most countries regulations forbid any transmission in
the broadcast waveband. If you install the
properly no such radiation is generated. To avoid
interference, please, strictly keep the installation rules.
Dension Audio Systems Ltd. and its distributors do not
take any responsibility for the legal consequences of
improper use of the
Disclaimer Disclaimer
Dension Audio Systems Ltd. is not liable for any
incidental, consequential or indirect damages. In case
of erratic behavior of your car's electrical system please
disconnect your ice>Link FM first and have it checked
by your installer. Dension does not assume liability for
any diagnostic fees.

Technical data

Technical
Dimensions:
Power supply:
Active / Standby current:
Operating/Storage temperature: -10 +50C/-30 +80C
FM channels:
Frequency response:
Channel separation:
Signal/noise ratio:
Distortion:
with the supplied cable tie. For
is delivered in plastic sponge
ice>Link FM
104 x 30 x 30 mm
9-16 V DC
< 20 mA / < 1 mA
87.7 – 87.9 – 88.1 – 88.3 –
88.5 – 88.7 – 88.9 MHz
30 – 15,000 Hz, +/- 1 dB
> 27 dB
> 50 dB
< 0.3 %
ice>Link FM
.
GB