Publicidad
Enlaces rápidos
Lil'Frog Walker 2-in-1 Activity Center
22701
ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED
Styles and colors may vary.
Los modelos y colores pueden variar.
Required: Phillips Screwdriver
Requerido: Destornillador de estrella
IMPORTANT: Read all instructions before assembly and use of this product.
Keep the instructions for future reference.
IMPORTANTE: Lea todas las instrucciones antes de ensamblar y utilizar este producto.
Guarde las instrucciones para referencia futura.
Customer Service :
1-(800)-377-3777
Servicio al Cliente :
INSTRUCCIONES DE ENSAMBLAJE
DEBE SER ENSAMBLADO POR UN ADULTO
(B)
English Instructions
Instrucciones en español
www.deltachildren.com
DCP Cat # 10-28-14-V2
Publicidad
Manuales relacionados para Delta Children Lil'Frog 22701
Resumen de contenidos para Delta Children Lil'Frog 22701
- Página 1 Lil’Frog Walker 2-in-1 Activity Center 22701 ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSAMBLAJE ADULT ASSEMBLY REQUIRED DEBE SER ENSAMBLADO POR UN ADULTO Styles and colors may vary. Los modelos y colores pueden variar. Required: Phillips Screwdriver Requerido: Destornillador de estrella IMPORTANT: Read all instructions before assembly and use of this product. Keep the instructions for future reference.
- Página 2 IMPORTANT! Before assembly or each use of this walker/stationary activity center, inspect this walker/stationary activity center for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Delta Children’s Products Customer Service Department at 1.800.377.3777 for replacement parts and instructions if needed. Never substitute parts.
-
Página 3: Cuidados Y Mantenimiento
NO se utilice si faltan algunas de las piezas o están rotas. Contacte al Departamento de Servicio al Cliente de Delta Children’s Products al 1.800.377.3777 para el reemplazo de piezas o instrucciones en caso de necesidad. - Página 4 Battery Safety Information Información de Seguridad de las Baterías: In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon zinc) or rechargeable (nickel-cadmium). •...
- Página 5 Parts / Piezas IMPORTANT! Please remove all parts from the package and identify them before assembly. IMPORTANTE! Por favor saque todas las piezas del paquete e identifíquelas antes de comenzar a ensamblar. Front Swivel Rear Non-Swivel Seat Ring x1 Seat Pad x1 Screw x6 Large Nuts x4 Casters x2...
- Página 6 Step 1: Assembling the Footboard Paso 1: Ensamblaje de la Base Inferior • Assemble the Front Swivel and Rear Non-Swivel wheels as illustrated on page 7. • Push down on the wheels until they are fully secured. • Insert the four Long Stair Stoppers into the receiving holes on the left and right side of the Footboard. Make sure they are properly inserted in the groove as illustrated.
- Página 7 For Stationary Clip see instructions for stationary Make sure Stoppers are properly features on page 6. inserted into grooves as illustrated. Align Stopper with white opening. Para el clip estacionario vea las instrucciones Place screw in hole then tighten. para las funciones estacionarias en la página 6. Asegúrese de que los Bloqueadores estén correctamente insertados en las muescas, como aparece en la ilustración.
- Página 8 Step 2: Attaching Legs to Base Paso 2: Fijación de las Patas a la Base • Assemble the Legs to the base: Press the Leg button and insert it into the mounting hole at the base as illustrated (Fig. A, B & C). Once completed, make sure all Legs are adjusted to the same height level.
- Página 9 Step 3: Assembling the 2-in-1 Activity Center Paso 3: Ensamblaje del Centro de Actividades 2-en-1 Assemble Walker Top Base to Footboard: • Align front of Walker Top Base with front of the Footboard. • Connect the Legs with the Walker Top Base as shown in Fig D. Then secure the Legs to the Walker Top Base with the Large Plastic Nuts (x4) , screw clockwise as illustrated in Fig E &...
- Página 10 Step 4: Assembling Seat Pad to Seat Ring Paso 4: Ensamblaje del Asiento con el Aro del Asiento • Locate the Seat Ring and the Seat Pad. Locate the thinner part of the Seat Ring which will indicate the front. See Fig H. •...
- Página 11 Step 5: Assembling Seat to Walker Tray Paso 5: Ensamblaje del Asiento a la Bandeja de la Andadera Take completed seat and place it in the center of the Walker Top Base. • • Secure by making sure the Plastic Ring Tabs are snapped into place. Tome el asiento ya armado y colóquelo en el centro de la Base Superior de la Andadera.
- Página 12 Step 7: Instructions for Music Keyboard Paso 7: Instrucciones para el Teclado de Música Insert Music Module into open slot at the front of Walker until you hear a click or until secured. • • Press down keyboard to activate music. Inserte el Módulo Musical en la ranura abierta al frente de la andadera hasta que escuche un clic o hasta que quede encajado.
- Página 13 Instructions for Stationary Feature Instrucciones para la Función Estacionaria • FOR USE ONLY WHEN USING AS STATIONARY ACTIVITY CENTER • SEAT SWIVEL FUNCTION – For seat to swivel, lift and rotate the red knob in position as shown in Fig J. To lock seat in place, lift and rotate red knob in position as shown in Fig K.
-
Página 14: Adjusting The Seat Height
Instructions for Changing Seat Height Instrucciones para Cambiar la Altura del Asiento NOTE: The activity center can be adjusted to 3 different height levels. Make sure all Legs are adjusted to the same height level when adjusting the height of the seat. NOTA: El centro de actividades puede ajustarse a 3 diferentes niveles de altura. - Página 15 Notes: Notas: www.deltachildren.com...
- Página 16 Delta Childrens Products Corp. 114 West 26th Street New York, NY 10001 1-800-377-3777 www.deltachildren.com Made in China / Hecho en China...