Munchkin Steam Guard Guia De Inicio Rapido página 3

Before each use
Before each use
• Prior to sterilizing, wash all items in mild soapy water and rinse thoroughly in
unsoftened water. It is recommended not to use antibacterial soap because over
• Prior to sterilizing, wash all items in mild soapy water and rinse thoroughly in
time and with consistent use, plastic may become brittle.
unsoftened water. Do not use antibacterial soap.
• Remove rack and pour 7 fl. oz. of water, preferably distilled, into the reservoir.
• Remove rack and pour 7 fl. oz. of water, preferably distilled, into the reservoir.
• Put the rack back into the base.
• Put the rack back into the base.
When loading the sterilizer, always ensure the items are
When loading the sterilizer, always ensure the items are
positioned to allow effective circulation of steam.
positioned to allow effective circulation of steam.
To load up to four 5 oz. or 9 oz. wide mouth bottles
To load up to four 5 oz. or 9 oz. wide mouth bottles
(see diagram B)
(see diagram B)
• Place the inverted bottles into crescent-shaped holders around the rack's central
• Place the inverted bottles into crescent-shaped holders around the rack's central
stem.
stem.
• Place nipples around the edge and slot dome caps into holder above the nipples.
• Place nipples around the edge and slot dome caps into holder above the nipples.
• Place locking rings on their side, behind bottles.
• Place locking rings on their side, behind bottles.
B
CCD-0032-000 REV1
2