Configuration - Steren ALA-2000 Manual De Instrucciones

CONFIGURATION

Before to start the settings process you must restart the
alarm.
1. Slide the switch to the ON position. You will hear a tone
and the LED of the blinking light, will flashing once.
2. Press once the setting
button. The LED of the
blinking light, will flashing.
3. Wait for 3 seconds, in the remote control press SOS
button. If the pairing is success the LED of the blinking
light, will flashing once.
4. Press the setting button 4 times. The LED of the
blinking light, will turn on one by one, repeat this process
until the LED power off.
19