Publicidad
Idiomas disponibles
Idiomas disponibles
Tools Required
Electric Drill with appropriate bit
Utility Knife
Side Cutters
Conduit
1
Leviton Single Gang
Power Modules
1. Using side cutters and/or utility knife,
remove knockouts as required. Deburr as
required.
Screwdriver
Level
2
2.
Note: For old work, remove drywall so that
3
Keep SMC level. Using six drywall
screws (not supplied) attach SMC
using an electric drill with the
appropriate bit.
SMC tabs sit directly on studs. The
cover frame will conceal 2.25 inches
away from enclosure.
4
3. Once drywall is installed
mount cover using supplied
screws.
4. If lock feature is desired, order
locks (P/N: 5L000-LOK), remove
plastic plugs from openings, and
insert locks into cover openings.
DI-001-49605-20A
Publicidad
