Using The Optional Ac Adapter - A&D Medical UA-851ANT Guía De Instrucciones

USING THE OPTIONAL AC ADAPTER

The UA-851ANT has an AC adapter jack to allow you to supply power from an
outlet in your home. We recommend you use only the optional A&D Medical AC
adapter to avoid potential damage to the monitor. To purchase the optional AC
Adapter, please contact A&D Medical at 1-888-726-9966.
Connecting the AC adapter to the monitor:
1. Gently insert the AC adapter plug into a 120V AC outlet.
2. Connect the AC adapter plug into the jack on the back of the monitor.
Disconnecting the AC adapter from the monitor:
1. Turn the unit off by pressing the START button.
2. Disconnect the plug from the jack.
3. Gently remove the AC adapter from the outlet.
NOTE: If monitor has batteries and an AC adapter connected, the measurements
stored in memory may be lost if AC adapter is unplugged from the wall first. To
ensure that measurements remain in memory, make sure the unit is off and that
the jack plugged into the monitor is removed quickly before unplugging adapter
from the wall.
E-10
Jack
Plug
AC Adapter