Brewing Coffee - Kitchen Aid KCM1208 Manual Del Usuario

USING THE COFFEE MAKER
3
Please consider the default Brewing cycle time for a full pot (12 cups) is
NOTE:
approximately 10-minutes.
USING THE PREVIOUSLY PROGRAMMED AUTO SET TIME
These steps can be followed to save the Auto Set time after following the steps in the
"Programming the Auto Set feature" section.
1
2

BREWING COFFEE

TIP: Brew 2 pots of fresh, cool water and discard before brewing the first pot of coffee.
1
Default Standard Brewing cycle time for a full pot (12 cups) is approximately
NOTE:
10-minutes.
2
Auto
x
NOTE: Allow the Coffee Maker to cool for 5 minutes before starting the next brew cycle.
To save the current displayed time and exit Auto Set:
Wait for 10 seconds, or press any button (Clean, Auto
Set, Bold or Brew). The Auto indicator will remain lit
and the time display will go back to the current time.
To cancel the Auto Set time after programming is
complete: Press AUTO SET again; or
press the BREW/CANCEL button.
Press the AUTO SET button. The Auto indicator will
flash and the time display will show the previously set
Auto time.
To save the current displayed time and exit Auto Set:
Wait for 10 seconds, or press any button (Clean, Auto
Set, Bold or Brew). The Auto indicator will remain lit
and the time display will go back to the current time.
Press the BREW button to begin brewing coffee. You
can use any of the BREW buttons provided on side or
on front. The Coffee Maker will beep 1 time, and the
"Brew" icon will light up in the display when the Brew
cycle is started. Also, front Brew button will light up.
The Coffee Maker will beep 3 times when the Brew
cycle is complete, then will automatically initiate the
AM
PM
2-hour Warm mode. The Brewing icon will turn off and
the Warming icon will light up. The screen will display
remaining time of Warm mode from 2-hour. After the
Warm mode completes, one long beep will sound.
USING THE COFFEE MAKER | 9