Tabla de contenido
Publicidad
a
Quick start guide
Bluetooth® speaker
For more information see the extended manual
online: ned.is/spbt6000bk
Intended use
The product is exclusively intended to be used as a Bluetooth speaker.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
Bluetooth® speaker
2
Speaker grill
3
Carrying strap
4
AUX indicator LED
5
Multi-link indicator LED
6
Bluetooth indicator LED
7
Battery indicator LED
8
Multi-link master button
9
Power switch
Safety instructions
-
WARNING
•
Read the instructions before use.
•
Only use the product as described in this manual.
•
Do not use a damaged product.
•
This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
Charging the product
4
The battery is only partially charged upon delivery. Fully charge
the battery before first use.
1. Connect the power cable to A
2. Charge the battery for at least 6 hours when you use it for the
first time.
Bluetooth pairing
9
1. Press A
to switch on the product.
e
2. Press A
for 2 seconds.
4
The speaker says: "Bluetooth pairing".
3. Enable bluetooth on the device you want to pair the speakers
with.
SPBT6000BK_MAN_COMP_(19519 1422)_V00_04.indd 4
SPBT6000BK
10
Multi-link sub button
11
Volume- button
12
Play / pause / voice assistant
13
Volume+ button
14
Power input
15
Reset opening
16
3.5 mm input
17
USB power output
t
and a power outlet.
4. Select "SPBT6000" from the list of available Bluetooth devices on
your device.
6
4
A
lights up to indicate pairing is successful.
4
The speaker will switch off automatically after 45 minutes of
inactivity.
Link multiple speakers
4
You can link up to 100 SPBT6000BK speakers to each other.
9
1. Press A
on the first speaker to switch it on.
8
2. Press A
to enter Link mode. A
9
3. Press A
on the second speaker to switch it on.
q
5
4. Press A
. A
starts blinking.
4
When the speakers are successfully linked, A
continuously on the master speaker and the subspeaker will blink.
5
4
A
stops blinking after 2 minutes to indicate Link mode has
ended.
5. Repeat these steps for every speaker you want to link.
6. Connect your audio source to the master speaker to play music.
See paragraph Bluetooth pairing.
Controlling the music
e
1. Press A
to play or pause the music.
w
r
2. Press A
or A
to change the volume.
r
3. Press and hold A
for 2 seconds to skip to the next track.
w
4. Press and hold A
for 2 seconds to skip to the previous track.
Wired connection
1. Connect a 3.5 mm audio cable into A
your audio source.
4
4
A
lights up.
2. Start playing music.
Using a voice assistant
e
•
Press A
twice to activate the voice assistant on your audio
source.
Using the speaker as a powerbank
i
•
Connect a USB cable to A
Resetting the speaker
•
Push a thin rod, like a paper clip, in A
Specifications
Product
Article number
4
56
will start blinking.
5
lights up
u
and the other end to
and the device you want to charge.
y
. The speaker will reset.
Bluetooth® speaker
SPBT6000BK
6-9-2019 14:57:10
Publicidad
Tabla de contenido
