Important Notice - Ibx V10 Manual Del Usuario

V10 series Vacuum pump with valve and vacuum gauge,

Important notice

This instrument is designed for laboratory usage only. Please read this manual carefully before
installing or operating this equipment. The instrument shall not be modified in any way. Any
modification will void the warranty and may result in potential hazard. We are not responsible for
any injury or damage caused by any non-intended purposes and modifying the instrument without
authorization.
1. Check the voltage specified on the name-plate and ensure it matches the line voltage in your
location.
2. The pump is not corrosion-proof. Please do not operate it with corrosive gases directly.
3. Install the instrument in a clean, dust-less and ventilated area under 40℃.
4. The Prote filter cartridge can prevent a large amount of liquid from overflowing into the
TM
pump. Please ensure the liquid level of flask not exceed safety level. Failure to comply can
result in serious damage to the pump and void the warranty. If it occurs, please contact the
distributor immediately for service.
5. The filter cartridge is used to absorb moisture and dust. Please replace the cartridge to
maintain proper pumping efficiency when it is saturated.
6. To avoid damaging the pump easily, please vent the pump before starting the pump.
7. Don't incline the pump during work to prevent the Prote
inlet.
8. This pump has a thermal protection device that automatically shuts-off when it becomes
overheated.
9. The temperature of the surface of pump is very high after use or during work, please don't
touch it to avoid being burnt.
10. Do not use any lubricant, which may damage the pump.
11. Never spray flammable or toxic materials.
If the supply cord is damaged, Please contact the manufacturer or your service agent for
replacement to avoid hazard.
User Manual
18 l/min, -670 mmHg
2
filter cartridge from blocking the air
TM