Preparing The Soft Springs; Wearing Your Vs600 - VoiceStar VS600 Manual Del Usuario

Preparing the Soft Springs

Soft springs are made extra long, and can be cut to fit your ear,
using scissors or a hobby knife. Cut a little piece of the soft spring
at a time (Approx. 0.3 cm / 0.125 inches). Put the soft spring on the
headset, and adjust it for a comfortable fit.
Left Ear Right Ear
Wearing Your VoiceStar™ VS600
Use your index finger to bend the soft spring, and insert the head-
set in your ear. Place the soft spring in the upper bend of your ear.
For best audio quality, place the headset and phone on the same
side of your body.
Note: Do not place the soft spring in your ear without the headset
attached.