SATA AE5791 Manual Del Uso página 4

中文
EN DE RU KO PT JA ES
AE5791
Technical Description
Connection 1/4"
Air Supply 6 - 10 bar ( 87 - 145 psi )
Consumption 180 L/min (8 bar)
Oil Tot Volume 1,2 L
APPLICATION
Withthisbrakebleeder, onepersoncancarryoutthebleedingofthe brakesystems.Bleedingiscompletedquickly,cleanlyandsimply.Brake fluid is
sucked into the container avoiding unnecessary spillages.
- Connect the gun to the compressed air line system.
- Setthebrakebleeder'srubberpipeonthebrakesystem plug, and loosen the plug.
- Activatethehandleofthebrakebleeder,apartialvacuum is created in the brake bleeder container, and the fluid is sucked into the container.
- When the brake fluid is free of air bubbles, which can be seen through the clear hose, then tighten the bleeding plug and remove the
rubber pipe.
- Repeat the procedure for each brake calliper.
- REMEMBER to check the fluid level.
Attention
- DO NOT TOUCH THE BRAKE PEDAL WHILE BLEEDING THE BRAKES.
- NOTE - MAINTENANCE AND CLEANINGAFTERUSEISRECOM- MENDED
4