Price Pfister Catalina 548 Serie Guia De Inicio Rapido página 3

7
7D
7C
7A
7A
7B
7 PULL-OUT HOSE CONNECTION
From underneath sink, push Quick Connect Housing (7A), located on the end
of the Pull-out Hose (7B), fi rmly upward onto the receiving Tube (7C), until
unable to push any further. Pull down on the quick connect housing (7A). If
the housing and the Inner Collet (7D) separate slightly but do not pull off the
receiving Tube (7C), quick connect is secure.
8
8C
8A
8 WEIGHT ATTACHMENT
Your faucet includes a Weight (8A) which is not required, but will help to retract
the hose during pull-out operation. Attach Weight (8A) to the Hose (8B) using
Spring Clip (8C). Position Weight (8A) at approximately the lowest point on
the Hose (8B).
7B
7C
7A
8B
ENGLISH
9
9B
9A
HOT
9 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (9A) to Faucet Inlets (9B). Hot water supply
lines go into left inlet. Cold water supply lines go into right inlet. (Supply lines
are not included). Please follow manufacturer's instructions when installing
suppy lines.
10
10A
10 POP-UP ROD CONNECTION
Insert Lift Rod (10A) into hole at the back of Spout (10B). Gently, slide Lift Rod
(10A) down the Hole in Spout Hub (10B). Slightly bend the Receiving Tube
(10C) to allow room for Lift Rod (10A).
3
9B
9A
COLD
10A
10C
10B