Price Pfister Bernini 42 Serie Guia De Inicio Rapido página 3

7
7D
7B
7C
7 SECURING FAUCET
From underneath sink, secure Faucet Body (7A) by placing Metal Washer (7B) and
7
threading Long Nut ( / Hex.) (7C) onto Mounting Post (7D). Make sure that the bumps
16
on Metal Washer (7B) are facing up. Firmly hand tighten Long Nut (7C). Secure Long
1
Nut (7C) not to exceed a / turn, after hand tight.
4
Caution: Do not over tighten!
8
8C
8B
8A
HOT
8 WATER SUPPLY LINES
Connect Water Supply Lines (8A) to Faucet Inlets (8B). Hot water supply line goes to hot
inlet fitting indicated by red tag (8C). (Supply lines not included.) Follow manufacturer's
instructions when installing supply lines.
ENGLISH
7A
8B
8A
COLD
3
9
9 POP-UP ROD CONNECTION
Insert Lift Rod (9A) into hole at the back of Faucet Body (9B).
DRAIN BODY INSTALLATION
10
10A
10 POP-UP INSTALLATION
Install and adjust Pop-Up (10A) using separate instructions supplied with the Pop-Up
assembly.
9A
9B