How To Use; Care And Cleaning - Black and Decker CJ625 Manual Del Usuario

Exprimidor de cítricos
Ocultar thumbs Ver también para CJ625:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

How to Use

This product is for household use only.
1. Wash all parts as instructed in the C Re nD CLe nIng section.
2. ssemble your juicer as instructed in the SSembLIng yoUR JUICeR section.
3. Unwrap the cord from the base.
4. Plug the cord into a standard electrical outlet.
5. djust the pulp control to the desired amount of pulp in
your juice (F).
6. Cut fruit in half (examples: orange, lime, lemon or
grapefruit).
7. Place the cut-side of the fruit on top of the self-reversing
F
cone.
8. Using firm-to-moderate pressure, press down on the fruit
to start the juicing action (G).
9. Release pressure to stop the self-reversing cone from
rotating.
Important: The motor stops automatically when the
pressure is completely released.
10. Press down on the fruit again and the self-reversing
cone will start rotating in the opposite direction.
G
Note: Repeat steps 8-10 several times for best juicing
results.
11. To continue juicing, remove used fruit and repeat steps 6-10.
12. When done juicing, remove the fruit from the cone.
Important: The motor stops automatically when you remove the fruit from the cone.
13. Unplug the cord from the standard electrical outlet.
14. To serve or pour the juice, remove the cone and strainer by lifting them straight up.
15. grip the container handle with one hand and the base with the other hand.
16. Turn the container handle counterclockwise to unlock the container from the base.
17. Lift the container straight up and pour the juice.
5

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service
personnel.
TO CLE N:
1.
lways unplug the unit before cleaning or when not in use.
2. Remove the cover (first time use), cone and strainer from the container by lifting
them straight up.
3. Immediately rinse the cone and strainer with water after each use.
4. grip the container handle with one hand and the base with the other hand.
5. Turn the container handle counterclockwise to unlock the container from the base.
6. Lift the container straight up.
7. Use warm, sudsy water to wash all removable parts (cover, cones, strainer
and container) or place them in the dishwasher — top rack onLy.
8. Use a bristle brush to remove fine pulp that may remain on the strainer.
9. Wipe the base with a damp cloth or sponge; do not immerse in water or place
in the dishwasher.
10. Dry all parts before reassembling your juicer (see SSembLIng yoUR JUICeR
section).
TO STORE:
1. Unplug the unit.
2. Wrap the cord around the base of the unit.
3. before reassembling your juicer, make sure all parts are dry (see SSembLIng
yoUR JUICeR section).
4. Place storage cover over the juicer to keep it dust free.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido