5
4
DIAGRAMA ELECTRICO / ELECTRIC DIAGRAM
STIRRER OPERATION.
Turn on your equipment with the pilot switch (9) the pilot will turn on.
The electronic control regulates the motor speed proportionally, based on
the control knob (12) selection. This knobs allows the user to select
speeds between 50 to 1500 rpm, with an uniform and reliable force given
by a powerful permanent magnet.
NOTE: We recommend to increase the agitation speed uniformly and
gradually otherwise the magnetic bar could escape from the magnetic
field.
PRECAUTIONS.
To carry out any maintenance work disconnect the Stirrer from its energy
source.
Variations in voltage con damage the components and modify the control
settings.
Tun off your equipment when you are not using it.
REPAIRS.
Like any other manufactured product, some parts of the Stirrer could be
damaged after using for a long period. To replace them always use
original factory parts, a list of which is included in this instruction
manual. Always order the parts with its corresponding number.
All the parts, maintenance service or guarantee can be ordered from the
distributor where you bought the equipment or directly from the factory.