Weathermatic Nitro N-100 Instrucciones De Instalación página 2

Models
N -100 (1 in. FIP)*
N -100F (1 in. FIP with flow)*
N -100S (1 in. SLIPxSLIP)
N -100SF (1 in. SLIPxSLIP with flow)
N -100MB (1 in. Male x Barb)
N -100MBF (1 in. Male x Barb with flow)
*International specify–ISO
Features
• Engineering grade PVC body and cover with combination hex, slot,
and Phillips retaining screws
• Non-rising flow control stem throttles all valves from full open to closed
position on all flow control models
• Molded shock cone reduces effects of water hammer
• Nitro series is a normally closed type valve
• The diaphragm's dual self cleaning ports constantly flex, inhibiting sand
and silt from blocking valve action; no filters or strainers required
• The unique "reverse flow" porting design permits equal pressure
distribution on both sides of the diaphragm, regardless of line
pressure providing zero stress to prevent "stretching" a common cause
of valve failure
• High efficiency M24E solenoid with stainless steel actuator designed by
Weathermatic permits longer wire runs
• Easy access internal bleed lever has stops for open and closed
positions and requires no tools for manual operation
• 150 psi (10,3) bar rating
Electrical
24VAC/60 Hz
Inrush: 9.77VA
Holding: 6.2VA
See catalog wire sizing chart
14
NITRO PERFORMANCE
INFORMATION