KitchenAid KCG0702 Manual Del Usuario página 7

USING THE BURR GRINDER
ADJUSTING THE BURRS FOR A FINER OR COARSER GRIND
If you're an espresso or French Press aficionado, you may wish to adjust the factory
setting of the cutting burrs to provide optimum performance for your style of brewing.
Make sure the bean hopper is
empty; then, flip the POWER switch
1
up to turn on and run for a few
seconds to clear any debris.
Using a / in (4mm) allen wrench
5
32
or a hex-head screwdriver, remove
the screw from the front of the
3
grind control dial by turning it
counterclockwise. You will be able
to see the grind control gear after
the dial is removed.
FOR DETAILED INFORMATION ON USING THE BURR GRINDER
Visit kitchenaid.com/quickstart
and tips on how to use your Burr Grinder.
2
4
NOTE: If you cannot get the exact
maximum coarseness of grind you prefer
by adjusting the Burr Grinder while it is
off, try adjusting with the Burr Grinder
turned on.
for additional Instructions with videos, inspiring recipes,
For maximum grind fineness: Turn
the grind control dial to level 8.
For maximum grind coarseness:
Turn the grind control dial to level 1.
For maximum grind fineness: Flip
the POWER switch up to turn on
the Burr Grinder.
For maximum grind coarseness:
You do not need to turn the Burr
Grinder on while adjusting the burrs.
USING THE BURR GRINDER | 7