Weston 24-1001-W Manual Del Usuario página 5

OPERATING INSTRUCTIONS
1. Open the battery cover on the back side
of the Digital Control Display. Insert (1) 9V
battery and replace the battery cover. You
can also connect the 9V AC adapter to an
outlet (Follow the outlet instructions outlined
in this instruction manual) (Figure 1).
2. Place the scale on a level surface and
press the "ON/OFF" button to turn on the
scale. The Digital Control Display will
illuminate, displaying all controls. When
stabilized, it will display "0.00" (Figure 2).
3. Press the "MODE" button to change the unit of measure (Figure 3).
Mode 1
4. If the Digital Control Display does not display "0.00 LB / 0 LB 0 oz / 0.00 Kg",
(LB)
press the "TARE" button to reset the display to "0.00".
5. When the display shows
running low and will need to be changed soon (Figure 4).
Mode 2
(LB:oz)
or "Lo", this is an indication that the battery is
-5-
MODE TARE ON/OFF
Figure 2
Figure 3
Mode 3
(Kg)
Figure 4 Figure 4
Low Voltage
TIME
SET