iKEY-AUDIO G3 Manual De Instrucciones página 11

G3 Functions
The iKEY G3 is a portable recorder that al-
lows you to record, playback, and listen to
audio files. The unit also has a mix feature
that allows you to either play along or record
while listening to another file. When finished
recording, files can easily be transferred be-
tween the G3 unit and your computer.
Getting Started
To begin using the iKEY G3, you have to
ensure that it has a working power supply
and that the included SD card (SDHC com-
patible) is connected.
Power Supply
A.
Install the 4 AA batteries that came with
the unit by simply removing the battery
Connections and System Control
11
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
compartment cover (1) located on
the back of the unit.
B.
Connect the power adapter
to the DC input (3) located on
the left side of the unit and
connect the other end into an
electrical outlet.
*NOTE: There is a battery life indicator on the
top right of the LCD screen (7) that drains ac-
cording to how much battery life is left.
(options)
SD Card Connection
Insert card here
the way it is shown
The G3 comes with a 1 GB SD card that
stores the recordings. Before turning on
fig. 1.1
the unit, ensure the card is inserted into the
slot (15) located on the bottom of the G3. To
connect the card, push the card completely
fig. 1.2
in the slot until it clicks into place. DO NOT
FORCE THE CARD IN.
To remove the card, slightly push the bot-
tom of the card. It will slide out partially, and
then can be pulled out.
Turning On the Unit
Now that the SD card and power source
fig. 1.3