Resumen de contenidos para Air 43809
- Página 1 Big & Tall Executive Air™ Chair Silla ejecutiva Aire de durabilidad commer- cial Assembly Instructions Instrucciones de Ensamblaje Model/Modelo: 43809...
- Página 2 Parts / Partes Casters Star Base Gas Lift with Telescoping Cover Seat Plate Ruedas Base en forma de estrella Elevador neumático y cubierta Mecanismo del asiento telescópica Quantity/cantidad: 5 Quantity/cantidad: 1 Quantity/cantidad: 1 Quantity/cantidad: 1 Arms Seat Cushion Back Cushion Brazos Cojín del asiento Cojín del respaldo...
- Página 3 1” Screws 1-1/2” Screws 2-1/2” Screws Black Plastic Caps Allen Key M5 Tornillos de 25mm Tornillos de 38mm Tornillos de 64mm Tapas plásticas negras Llave allen M5 Quantity/cantidad: 2 Quantity/cantidad: 6 Quantity/cantidad: 4 Quantity/cantidad: 4 Quantity/cantidad: 1 Step 1 Step 2 Place the Star Base (B) upside down and insert Turn the Star Base (B) over and insert the Gas Lift 5 Casters (A) into the holes on the Star Base (B).
- Página 4 Step 3 Step 4 Attach Seat Plate (D) to the bottom of the Seat Cushion Align Back Cushion (G) with Seat Cushion (F) by positioning (F) (with the front of the seat plate facing the front of seat the back support plate over the Seat Plate (D) with 1-1/2” cushion).
- Página 5 Step 5 Step 6 Insert 2-1/2” Screws (J) into arm holes, attaching Arms (E) Position the assembled chair upright with the seat to sides of Seat Cushion (F) and Back Cushion (G) with plate facing down. Insert the Gas Lift with Telescoping the Allen Key M5 (L).
- Página 6 The chair is now ready for use. *Note: Remove the packing material (Y) placed between the back cushion and the air frame. Paso 7 Ponga las tapas plásticas negras (K) en los hoyos de los brazos una vez que haya ajustado los tornillos.
-
Página 7: Function Instruction
Operating Instructions Instrucciones de Uso Function Instruction - 1 To Adjust Seat Height: While seated, reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. To lower the seat, lift the handle while applying more weight downward on the seat. - Página 8 Function Instruction - 2 To Operate Tilt Lockout: While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle all the way out (away from the seat plate) to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and push the handle in towards the seat plate.
- Página 9 Function Instruction - 3 To Adjust Tension On The Tilt: Reach under the front center of the chair, grasp the round knob (R) and turn it counter - clockwise to stiffen the tilt mechanism for a heavier user. Turn the knob (R) clockwise to loosen the tilt mechanism for a lighter user.
- Página 10 While seated, the open-air contours of the cushions which are designed to breathe and flex, can dynamically provide continuous support by connecting with your body’s natural movement. The air cushions conform to the curve of your spinal cord and are intended to relieve your back from stress.
- Página 11 Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt. This warranty does not apply to “as is” or previously owned seating products.
-
Página 12: Garantía Limitada
Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así...