MaxiPool MOVI-KLEEN Serie Operación Manual página 5

• Take one of the two caddy hooks and insert the rod support into the recessed hole in the
hook. Screw one Phillips head machine screw through the caddy hook into the rod support
Snug up but do not fully tighten. Repeat for the other caddy hook as shown in Fig 12.
• Slide the caddy hook assembly onto the top of the upright caddy poles with the hooks
pointing up and suspended over the caddy base. Align the screw holes on the inside of
the poles with the screw boss on the caddy hooks. Screw the Phillips head machine
screws most of the way in but do not tighten.
• Slide the caddy handle into the receptacle on the top of the caddy hooks. The handle
should curve away from the caddy towards the back of the unit (away from the caddy
hooks). Align the screw holes with the screw boss on the caddy hook. Tighten all Phillips
head machine head screws at this point. (See Fig 13)
• Insert the six black screw covers into the screw bosses to hide the screw.
• Place the transformer into its mounting spot in the base of the caddy as shown in fig 14.
• Place the cleaner on the caddy with the wheels facing forward and down. The brushes
will be suspended in this position which will increase the longevity and cleaning
properties of the cleaner. Loosely wrap the cord (see above) and hang from the caddy
hooks as shown in Fig 15
5