Descargar Imprimir esta página

Safety Instructions - Uniteck UNIFIX 20.1 WB Manual Del Usuario

Ocultar thumbs Ver también para UNIFIX 20.1 WB:

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INSTRUCTIONS

Take appropriate measures to prevent accidents during assembly work.
If the panel and support are exposed to sunlight for a long period of time, there is a risk of
burns. Protect yourself.
At the end of the work, check that your supports and panels are firmly attached.
RECOMMENDATIONS
Mount the Unifix brackets only on balconies or handrails with sufficient bearing capacity. Take
into account the additional load with panel:
-
Installation 10W: (Unifix 20.1 WB (1,3kg) + Unisun 10.12M (1,2 kg)): 2,5 kg
-
Installation 20W: (Unifix 20.1 WB (1,3kg) + Unisun 20.12M (2,2 kg)): 3,5 kg
Unifix supports are exclusively intended for fixing Unisun panels.
The arrangement of the sensors influences your electrical performance. Choose the optimum
tilt and orientation according to your environment. Avoid areas of shade or objects that may
cause shadows.
For more energy, it is possible to use two solar systems:
-
panels with the same orientation: installation in parallel (two panels + one regulator +
one wiring kit + branch connectors)
-
panels with opposite orientations: two separate installations (one panel + one panel +
one
controller + wiring kit) x2
PREPARATION OF UNIUN PANELS
Unisun panels may require 4 holes D=8 of the aluminium frame according to the following centres:
120 mm
260 mm
www.uniteck.fr
Unisun 10.12M ou 20.12M
EN
5/11

Publicidad

loading