Play Music - ifrogz impulse wireless Manual

impulse wireless instructions
1
Introduction
Turn on the Impulse Wireless headphones and experience
premium sound unleashed. The following will show you how to
enjoy your Impulse Wireless. To download this manual, visit
www.zagg.to/manuals.
2
Power and Pair
1. To turn on your Impulse Wireless headphones, press
and hold the Power button for three seconds until the
light flashes red and blue, indicating pairing mode. The
next time you turn your Impulse on, a blue LED will blink,
indicating it is pairing.
2. Ensure your device's Bluetooth® connection is on and
select "IFROGZ Impulse Wireless". Complete any additional
pairing steps based on your device. The LED will flash blue
every five seconds while your Impulse are on and paired.
3. To turn your Impulse off, press and hold the Power button
for three seconds. The LED will flash red until they are
powered off.
NOTE: If you are pairing with a new device, with your
headphones off, press and hold the Power button for five
seconds until the light flashes red and blue, indicating
pairing mode.
3

Play Music

1. Press the Play button to begin playing your music.
2. While music is playing, press Play quickly to pause it. Press
Play quickly again to resume.
3. Quick-press the Volume Up or Volume Down buttons to
control your audio volume.
4. Press and hold the Volume Up or Volume Down buttons to
track forward and back through your playlist.
Power Button
Play/Pause Button
Volume Up/
Track Forward Button
Volume Down/
Track Back Button