Gigabit Ethernet PoE+ Web-Managed Switch • Quick Install Guide
This guide presents the basic steps to set up and operate this device. For detailed
instructions and specifications, refer to the user manual enclosed with this product or
at intellinetnetwork.com.
Connections & Indicators
LEDs
• Link/Act LEDs:
Orange = 10/100 Mbps
Green = 1000 Mbps
• MAX1 = Ports 1-4
MAX2 = Ports 5-8
Ports
All ports on the switch support
Auto-MDI/MDI-X functionality, so
crossover cables and uplink ports
are not needed for connections to
PCs, routers, other switches, etc.
Cat5/5e/6 UTP/STP cables provide
optimal performance; if a status LED
doesn't indicate a link or activity,
check the corresponding device
for proper setup and operation.
Power
Use the included power cord to connect the device (on the rear panel) to an AC outlet.
Confirm that the power LED on the front panel is lit.
Reset
Press the Reset button for 2 seconds and the switch automatically reboots. Press the
Reset button for 5 seconds to restore default settings.
Installation
(Go to Page 8)
Basic Web-Based Browser Management
1. Open your Web browser.
2. Enter "http://" and the IP address of the switch in the Address field. The default
management IP address is 192.168.2.1.
3. Press <Enter> to display the login screen. In the Username field, enter "admin";
in the Password field, enter "admin. " Click LOGIN.
2
ENGLISH
LED
Status
Operation
PWR
On
Power on
Off
Check the AC connection; turn the
power on
PoE
On
Port is linked to a PSE/PoE device
Blinking
The PoE circuit may have a short or
overload
Off
No PSE/PoE device is linked; or no
power is supplied due to power limits
of the port
Link/
On
Valid port connection
Act/
Blinking
Valid port connection; data is being
SFP1/2
transmitted/received
Off
No link established
MAX1
On
The combined power output of Ports
1-4 is 55W
Blinking
The combined power output of Ports
1-4 has exceeded the 70W maximum
Off
The combined power output of Ports
1-4 is below 55W
MAX2
On
The combined power output of Ports
5-8 is 55W
Blinking
The combined power output of Ports
5-8 has exceeded the 70W maximum
Off
The combined power output of Ports
5-8 is below 55W
English