Power Outlet; Home Cinema - DRAKE DIGITAL ESR-T200 Manual Del Usuario

Front Panel
The buttons and indicators on the Front Panel of ESR-T200 are described in the following figure and table:
1 Smart Card Slot
2
Rear Panel
It's equipped with connectors for attaching VHF/UHF antenna and other home entertainment equipment to
your TV set. Equipment may be connected in various ways, so try to use the connectors providing the
highest quality video output. Obtain the best performance by using SCART, Audio/Video (RCA), or IF
connectors, respectively.
B
④
Telephone
Socket
TV
No. Component
1 SCART Output
2 RF In
3 RF Out
4 Audio Output
5 Video Output
6 SPDIF
A Power Input (with
attached power
adapter/cable)
B Modem
RECEPTOR DIGITAL MHP DRAKE ESR-T200
②
LED Indicator
VCR
⑤ ①
Description
Connect to your display's SCART input connector.
Connects the VHF/UHF antenna. This connector accepts input signals
ranging from 51 to 858 MHz.
Connects to TV or VCR RF input (for video and mono audio signals).
Connects to the audio input on your TV, VCR or stereo system.
Connects to the video input on your TV or VCR.
Connects to the digital audio input of stereo system.
Connect power adapter cable to the receiver's power input (12V DC),
and attach power adapter to the power source from 90-260 V AC,
50/60 Hz.
Connect with telephone line for the return path purpose. Line: connects
to the wall end telephone plug. Phone: connects to your home phone.
⑥ ③ ②

Home Cinema

2
①

Power Outlet

A