1.0 Safety Precautions
AccuBlock
Before using the
To guarantee problem free, safe operation, it is essential to observe the following points:,
1.1 Operation Safety Precautions
•
Do not use this product in an explosive environment
•
Do not use in the presence of flammable or combustible material
•
Do not heat substances that react violently when heated
•
Do not touch block when hot or when unit is heating. Use block lifter.
•
Do not spill liquids into the well area or into the unit side vent holes
•
Connect unit only to a properly grounded outlet
Warning! Do not touch area around block or block well when unit is hot. This can result
in bodily injury, including burns.
Warning! Modification of this product or use of the product in any manner not specified
by this instruction manual may cause injury and/or may void the warranty.
2.0 General Specifications
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
Temperature range
Temperature display resolution
Temperature uniformity
Temperature accuracy
Temperature controller
Timer
Operating Altitude
Control
I/O
Dimensions (W x D x H)
Weight
2.0 Electrical requirements:
D1301
115V
D1301-230V
230V
D1302
115V
D1302-230V
230V
D1304
115V
D1305
230V
Digital Dry Bath for the first time, please read this entire manual carefully.
Ambient +5°C to 150°C
0.1°C 4 digit LED
± 0.2°C (at 37°C in block)
± 0.3°C
Microprocessor – user calibratable
1 to 99hours59minutes or continuous in 1 minute increments
Not to exceed 2,000 meters
PI Microprocessor controller
USB unidirectional
D1301/D1302
D1304
D1301/D1302
D1304
50/60Hz, 1 A, Fuse 1.6 AT
50/60Hz, 0.5 A, Fuse 1AT
50/60Hz, 1.9A, Fuse 3.15AT
50/60Hz, 0.95 A, Fuse 1.6AT
50/60Hz, 3.73 A, Fuse 5 AT
50/60Hz, 1.86 A, Fuse 3.15 AT
8.3 x 11.4 x 4.7 in./21 x29 x 12cm
8.3 x 15.3 x4.7 in./21 x 39 x 12 cm
7.0 lbs./3.2 kg
9.6 lbs./4.4 kg
AccuBlock Digital Dry Bath | 1