Injector replacement table:
Burner
Semi-rapid
Rapid
Triple-ring
USER INSTRUCTIONS
Stone, glass and ceramic pans are not suitable to use on a ceramic hob because they do not conduct heat well
1. To light the hotplate push in the appropriate control knob and turn anti-clockwise to the large flame symbol (fig. 8).
2. Keep the knob depressed until the burner lights.
3. Turn the tap to the required setting.
4. In the event of the burner flames being accidentally extinguished, turn off the burner control and don't attempt to
reignite the burner for at least 1 min.
NOTE: Matches can be used to light the burners in the event of a power failure. Keep the control knob pressed in for 15
seconds ensuring the burner stays lit when released. If the burner fails to stay lit wait for 1 minute before relighting.
Closed position
Full on position
Reduced rate position
SELECT THE RIGHT BURNER
Use an appropriately sized pan and with flat bottom for each burner (see the table below and fig. 9).
When the contents of the pan start to boil, turn the knob down to reduced rate position. Always put a lid on the pan
WARNING
NOTE: Please not use cooking vessels that overlap the boundaries of the hob
Burners
pans in cm
Type of gas
Natural
G20
Butane
G30
Natural
G20
Butane
G30
Natural
G20
Butane
G30
Triple Flame
Rapid 3000W
3300W
24-26
Pressure
Nozzle diameter
mbar
1/100mm
20
28~30
20
28~30
20
28~30
Semi rapid
1750W
20-22
16-18
7
Nominal Charge
kW
97
1.75
65
1.75
130
3.0
86
3.0
135
3.3
92
3.3
Auxiliary
1000W
10-14
g/h
127.35
127.35
218.31
218.31
240.15
240.15