ASROCK ALiveNF5-VSTA Manual Del Usuario página 16

USB 2.0 Headers
(9-pin USB8_9)
(see p.2, No. 15)
(9-pin USB6_7)
(see p.2, No. 18)
(9-pin USB4_5)
(see p.2, No. 16)
Infrared Module Header
(5-pin IR1)
(see p.2, No. 28)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.2, No. 25)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.2, No. 23)
1. High Definition Audio supports Jack Sensing, but the panel wire on the
chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC'97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
1 6 1 6 1 6
1 6 1 6
ASRock
Besides four default USB 2.0
ports on the I/O panel, there are
three USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
This header supports an
optional wireless transmitting
and receiving infrared module.
This connector allows you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
CD1
tuner card, or MPEG card.
This is an interface for the front
panel audio cable that allows
convenient connection and
control of audio devices.
ALiveNF5-VSTA Motherboard