Descargar Imprimir esta página

Helvex Cibeles MEP-2009 Guia De Instalacion página 2

Publicidad

Desenrosque la tuerca, retire la
2
rondana y el separador.
/
Unscrew the
nut, remove the stainless steel washer
and shank gasket.
empaque
gasket
separador
rondana
shank gasket
stainless
steel washer
tuerca
nut
Desenrosque el chapetón
5
master e inserte la rondana
de fibra al cuerpo lateral.
/Unscrew the escutcheon
and insert the fiber washer
to the body side.
chapetón
master
escutcheon
rondana
master
de fibra
lateral valve
Enrosque el conector "Y", al espárrago
7
de la salida, posteriormente enrosque las
mangueras (incluidas) al conector "Y" y a
los cuerpos laterales.
/ Screw the "Y"
connector to the faucet shank , then
screw the hose (included) to the "Y"
connector and lateral valves.
espárrago
faucet shank
conector "Y"
"Y" connector
Inserte la salida en el lavabo y
3
verifique que se coloque el empaque.
/ Place the faucet in the sink and verify
that the gasket is placed.
Limpie la superficie.
Clean the surface.
Coloque el cuerpo lateral con tuerca y rondana, considerando la altura necesaria para el correcto
6
funcionamiento de sus manerales, inserte la rondana y enrosque el chapetón, posteriormente coloque
el cuerpo maneral, enrosque el tornillo y la tapa. /
considering the needed height for the proper operation of the handle, insert the washer and screw the
escutcheon, then place the handle, tighten the screw and cover.
Apriete la contratuerca y el
cuerpo maneral.
/ Tighten the locknut and body
toggle.
Abra el suministro de agua y purgue
8
la línea de alimentación.
supply lines, open and close angle
stops.
líneas de
alimentación
angle stops
mangueras
caliente
incluídas
hot
included
hoses
4
separador
shank gasket
empaque
gasket
stainless steel
Place the lateral valve with nut and washer,
escutcheon
chapetón
color rojo
red color
10
9
/ To purge
½-14-NPSM
mangueras
(no incluidas)
(not included)
fria
cold
válvula angular
( no incluida)
angle stop
(not included)
Coloque el separador, rondana y
enrosque la tuerca para sujetar la
salida./Place the shank gasket,
stainless steel washer and tighten the
nut to hold the faucet.
rondana
tuerca
nut
washer
Apriete firmemente
la tuerca.
Thighten the nut.
tapón
plug
tornillo
screw
maneral
handle
master
master
rondana de hule
rubber washer
4,8 cm
rondana
tuerca
washer
nut
color azul
blue color
Conecte las mangueras (no incluidas) a
los cuerpos laterales y posteriormente a
la línea de alimentación.
/ Connect
hoses (not included) to the lateral valve
input and then to angle stop.
hoses
2

Publicidad

loading