Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

The most current version of these instructions can be found online at www.grahamfield.com.
Tools required: Phillips screwdriver
WARNING: Important! Read and understand these instructions before assembling or using the
Everest & Jennings Adjustable Back Upholstery with Cushion. If you do not understand any
part of these warnings or instructions, contact a healthcare professional for direction in the use
of this product. If the Upholstery is not properly assembled, personal injury and damage to the
Upholstery could result.
WARNING: If components are damaged or missing, contact your Graham-Field distributor
immediately. DO NOT use substitute parts. Use only Everest & Jennings replacement parts.
Non-Everest & Jennings replacement parts could cause personal injury and damage to the
Upholstery.
WARNING: DO NOT exceed the wheelchair's maximum weight capacity.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury caused
by improper assembly, installation or use of this product.
INTENDED USE
The Adjustable Back Upholstery with Cushion is intended to provide a stable surface for
propulsion and completion of wheelchair user's daily living activities.
Fig. 1
ASSEMBLY (REFER TO PICTURES ABOVE)
1. Use Phillips screwdriver to remove existing wheelchair back upholstery; keep hardware and
upholstery for future use.
2. Place Back Upholstery around backposts as shown in Fig. 1.
3. Using existing hardware, install screw through grommet at top of Upholstery into backpost as
shown in Fig. 2. Use Phillips screwdriver to tighten securely. Do this for both backposts.
4. Place cushion over Upholstery as shown in Fig. 3, and use hook and loop strips to fasten.
Wheelchair with Back Upholstery and Cushion installed is shown in Fig. 4.
5. Straps can be tightened or loosened as shown in Fig. 2 depending on user preference.
WARNING: Straps must be securely fastened. Failure to do so could affect back support and
result in personal injury.
2055LS-INS-LAB-RevB13
2055LS: ADJUSTABLE BACK UPHOLSTERY WITH CUSHION
ASSEMBLY AND OPERATION INSTRUCTIONS
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE USE
PARA INSTRUCCIONES EN ESPAÑOL, CONSULTE LA PAGINA 3
Fig. 2
Fig. 3
Fig. 4
1

Publicidad

loading

Resumen de contenidos para Everest & Jennings 2055LS

  • Página 1 2055LS: ADJUSTABLE BACK UPHOLSTERY WITH CUSHION ASSEMBLY AND OPERATION INSTRUCTIONS PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE USE PARA INSTRUCCIONES EN ESPAÑOL, CONSULTE LA PAGINA 3 The most current version of these instructions can be found online at www.grahamfield.com. Tools required: Phillips screwdriver WARNING: Important! Read and understand these instructions before assembling or using the Everest &...
  • Página 2 GF Health Products, Inc. (“Graham-Field”) offers a one (1) year limited warranty against manufacturing defects for the 2055LS Adjustable Back Upholstery with Cushion. During the warranty period, defective items will be repaired or replaced at GF Health Products, Inc. option.
  • Página 3 2055LS: TAPIZADO AJUSTABLE DE ESPALDA CON COJÍN INSTRUCCIONES DE ENSAMBLAJE Y OPERACIÓN POR FAVOR GUARDE ESTAS INSTRUCCIONES PARA USO FUTURO La más reciente versión de estas instrucciones podrán ser encontrado en linea en www.grahamfield.com. Herramientas necesarias: Phillips destornillador ADVERTENCIA: ¡Importante! Lea y entiende estas instrucciones antes de ensamblar o utilizar el Tapizado Ajustable de Espalda con Cojín de Everest &...
  • Página 4 GF Health Products, Inc. (“Graham-Field”) ofrece una garantía limitada de un (1) año contra defectos de fabricación por el Tapizado Ajustable de Espalda con Cojín 2055LS de Everest & Jennings. Durante el período de garantía, los artículos defectuosos serán reparados o reemplazados al opción de GF Health Products, Inc.