Assembly Instructions - Dyna-Flo DG732ELA-D Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Attach the left front leg (A), right front leg
(B), left rear leg assembly (C) right rear leg
assembly (D), front and rear leg supports (E)
and left and right leg supports (F) together
using sixteen M6 x 12 bolts (AA) as shown in
figure 1.
Note the location of the caster attachment
holes for parts C & D.
DO NOT TIGHTEN BOLTS AT THIS TIME.
Hardware Used
AA
M6 x 12 Bolt
2. Remove the cooking grates, water bowl,
wood chip box, wood chip box support and
grease tray from the inside of the smoker.
1
AA
x 16
2
6
B
A
E
F
C
Attachment holes
for casters
Model DGU732BDE-D Shown
D