Sight mark Flip 30mm Manual De Usuario página 6

ENGAGING THE FLIP-TO-SIDE ACTION:
The flip-to-side feature provides the ability to adjust to rapid changing environments. When the shooter needs the 1x
magnification of the weapon sight, the flip-to-side mount is pushed to the side and flipped down. This removes the
magnifier from the optical system but still makes it easily accessible when needed.
1) Push the left side of the 30mm mount (1).
2) A "snap" sound will be made, the slide mechanism has been engaged.
3) Continue to push the 30mm mount until it flips down to the right side of the mount.
4) A "snap" sound will be made when the 30mm mount is secured in place.
To re-engage the magnifier:
1) Push up on the 30mm mount (1).
2) A "snap" sound will be made. The slide mechanism has been engaged.
3) Continue to push the 30mm mount until it "snaps " securely to its original position.
original position flipped down position
3