Checking For Leaks - HAMPTON BAY PG139HDS Manual Del Usuario

Checking for Leaks

Your patio heater has been checked at all factory
connections for leakage. To check the connection at the
gas hose/regulator/cylinder:
a. Make a leakage solution by mixing 1 part liquid dish
soap and 3 parts water.
b. Spoon or brush several drops (or use a squirt bottle)
of the solution onto the gas hose/regulator and
regulator/cylinder and hose connection.
c. Turn on the gas cylinder valve. Inspect the
connections and look for bubbles.
d. If no bubbles appear, the connection is safe.
e. If bubbles appear, there is leakage. Loosen and re-
tighten this connection. If it still leaks, please call
customer service.
15
Please contact 855-HD-HAMPTON for further assistance.
Fig.14
HAMPTONBAY.COM