Using Your Snow Cone Maker; Getting Started - Impecca courant BLIZZY CSM-2081 Manual De Usuario

USING YOUR SNOW CONE MAKER

GETTING STARTED

• Unpack the Blizzy Snow Cone Maker and place it on a flat countertop.
• Handle the shaving blade with caution. DO NOT touch the blade.
• Wash the ice shaver cup carefully. Rinse and dry thoroughly.
• If using paper cones, be sure that the cone holder (7) is locked into
place by sliding it down into the two keyhole slots on the base.
• Remove the cone holder by lifting gently upwards from the base if you
would like to use a large bowl.
USING THE SNOW CONE MAKER
1. Place the base on a flat, level surface.
2. Insert the ice cup so the arrows align on the cup and the ring, facing
forward.
3. Fill the ice cup with ice cubes. Do not fill past the MAX line. If the ice
cup is overfilled the unit will not function.
4. Place a cone into the cone holder, or remove the cone holder and
place bowl below the ice bucket.
5. The motor may be aligned in any direction in the ice cup. Make sure
the motor grooves are aligned with the ice bucket grooves.
6. Plug in the unit and press firmly downward with both hands on the
power button.
7. To stop, release power button. The motor will automatically switch off
when ice cup is empty.
8. Add your favorite syrup to the snow cone and enjoy!
9. Unplug the unit immediately after use. Remove ice cup and clean
before storing.
–6–