Precautions For Use; Air Outlet - Argo baby joy Manual De Instrucciones

A detailed diagram of the components is available on the last page.
1. Place the diffuser on a flat and stable surface and away from the edge.
2. Remove the diffuser's plastic covers.
3. Pour mineral water (bottled or tap water) into the water tank up to the maximum level indicated (50ml).
4. Then add a few drops of water soluble fragrance (2-3 drops) to the water tank.
5. Carefully replace the plastic covers on the diffuser's base. Be careful when handling, the plastic covers are just
placed on the plastic base, they are not attached.
6. Insert the adaptor's connector into the DC jack input under the base of the diffuser.
7. Plug the adaptor into the outlet.
You are advised to change frequently the water in the tank and clean the diffuser once or twice a week, particularly if you
want to change the fragrance to be diffused.

Air outlet

Empty the water in the opposite
way to the air outlet, do not
empty the water in the air outlet,
this would damage the diffuser.
1. Turn the appliance off and unplug it.
2. Remove the covers and pour the water into the tank. Empty the water in the opposite way to the air outlet, do not
empty the water in the air outlet, this would damage the diffuser.
3. Clean the inside of the diffuser with a soft damp cloth and a little water. If needed, use a little white vinegar strongly
diluted. Do not use corrosive detergents. Carefully rub the ceramic disc with a cotton bud being careful about not to
scratch it.

PRECAUTIONS FOR USE

MAINTENANCE
6